HCC 2024 Day 10: Zombie Gnomes

Zombie gnomes

Welcome to day ten of the 2024 Halloween Craft Countdown, where I’m sharing 20 spooky themed Cricut papercraft projects in 20 days.

Woohoo, it’s GNOME DAY!! After all, it wouldn’t be a “Craft with Sarah” event without gnomes, right?!

As a huge fan of zombie movies and TV shows — especially classics like Shaun of the Dead and the early seasons of The Walking Dead — I couldn’t resist bringing a bit of undead charm to my Halloween crafts this year.

That’s why I created this Cricut papercraft project featuring a pair of zombie-themed gnomes, one male and one female.

They are perfect for adding a quirky twist to your Halloween décor and are designed to be cut from cardstock using the SVG files included in the post.

If you share my love for zombies and want a fun, creepy craft project, download the files and get started!

This project was part of 2024's Halloween Craft Countdown.

Find out more


Materials supply list

Here is a list of the materials that I used to make this project.

Please note that some of the links included in this article are affiliate links, which means that if you click through and make a purchase I may receive a commission (at no additional cost to you). You can read my full disclosure at the bottom of the page.

This project is suitable for the following types of Cricut machine: Explore Air 2, Explore Air 3, Maker, Maker 3, Venture and Joy Xtra and Joy. You will need to make the design smaller to cut on the original Joy.

Zombie gnomes


Foundation learning

If you're new to crafting with your Cricut, you may find the below links helpful.

They teach some of the skills mentioned throughout this tutorial.


Video tutorial

Watch the video below to see how to make this project. Keep scrolling for a written tutorial.


Written tutorial (with photos!)

Here’s how to make Halloween zombie gnome papercrafts using a Cricut machine!

Step 1) Download the cutting file & upload to Design Space

Download the files using the box below.

Purchase the File(s)

This cut file is available as part of the
Instant Access Bundle.

Find out more

Or, purchase this design individually from my SVG shop

Before you upload the SVG to Design Space, you need to unzip the download folder that it comes in.

After unzipping, upload the SVG files into Cricut Design Space. They are that files that start svg- in the filename.

Each gnome comes as a separate SVG files, so you will need to upload the male and female versions individually if you are planning to make them both.

Not sure how to do this? Here’s how to upload SVGs to Cricut Design Space. Make sure you upload the file which starts svg- in the filename!


Step 2) Size the gnome designs

Click the design on your canvas and use the width/height boxes near the top of the screen to make the gnomes the size that you want to cut them.

Personally, I find it easier to cut them out one-at-a-time, so I load them both onto the project and size them, then hide one of the designs so I can cut the first one its own. Then I go back to the Canvas, hide the one that I just cut and turn the other one back on, then cut that one.

TIP: Make sure the padlock icon above the width/height boxes is CLOSED before you resize. If it appears “open”, click it with your mouse to close it.

I don’t recommend going smaller than 3 inches tall as some of the details will get hard to cut. Here’s a tutorial on how to cut designs really small with a Cricut.

If you are cutting these designs on the original Cricut Joy machine, you’ll need to make them a maximum of 4.5 inches on the shortest side.

If you are cutting the design to fit in a specific frame, watch this video to see my top tips on how to resize it to fit perfectly, or read the tutorial here.


Step 3) Cut out all the layers

When you’re happy with how the project is looking in Design Space, click “Make” and follow the instructions on-screen to cut out all the pieces.

To change the paper size, go into the dropdowns over on the left side of the screen and choose the paper size that you want to use. You need to change it for every single colour.

To save space on your cardstock, you can move things around by clicking and dragging. Make sure when you’re moving things about that nothing overlaps because otherwise, it won’t cut out properly.

TIP: New to cutting cardstock with a Cricut? Check out this in-depth tutorial which goes through every step of the process, including tips for getting the best quality cuts from your Cricut.


Step 4) Stick the project together

Use 3D foam pads and glue to stick the layers together.

Use these guides to see the order to stick the layers together in.

Printable versions of these assembly guide are included in the folder when you download the cut files.

My favourite glues to use on papercraft projects are Bearly Art Glue and Collall All Purpose Glue.

These are great because they don’t “warp” or bend the cardstock like some glues do. You can use as much of it as you want and the card stays perfect – and it dries perfectly clear too!

Bearly Art Glue comes with a tiny nozzle to make it easy to apply glue to small areas of card. The Collall glue doesn’t come with this, so it’s easiest to decant it into needle tip applicator bottles so that you have more control.

The foam pads that I use are from “Dot & Dab”, but any foam squares will work. If yours are big then you may need to cut them smaller with scissors to fit inside the edges of the layers.

When adding the foam pads to larger pieces of card, make sure you add some in the middles of the pieces of card so it gives stability to the middles.

If you don’t add any foam pads in the middles then it can “sag” under the weight of the other layers which doesn’t look as good.

Continue sticking the pieces together, following the assembly guide, until your gnomes are all finished.


Halloween gnomes layered papercraft design

After sticking all the pieces of card together, your Halloween zombie gnomes are all finished!

You could then mount them in a shadow box or glue them to the front of a greetings card.

If you’d rather not mount your project in a shadow box, check out these free easel stands for two alternative ways to display it.

Or, go for a more simplistic approach by making a triangle stand or nail hook.

The triangle stands are completely invisible from the front of the project, making it look like it’s standing up by magic! The hooks allow you to hang the design straight on the wall without a frame.

Happy crafting,
Sarah x