CCC 2024 Day 14: Mistletoe Layered Design

Step 2) Format the design

Click the design on your canvas and use the width/height boxes near the top of the screen to make it the size that you want to cut.

TIP: Make sure the padlock icon above the width/height boxes is CLOSED before you resize. If it appears “open”, click it with your mouse to close it.

I don’t recommend going smaller than 4 inches wide as some of the details will get hard to cut. Here’s a tutorial on how to cut designs really small with a Cricut.

If you are cutting this design on the original Cricut Joy machine, you’ll need to make it a maximum of 4.5 inches wide.

If you are cutting the design to fit in a specific frame, watch this video to see my top tips on how to resize it to fit perfectly, or read the tutorial here.

If you want to hang up the mistletoe then you’ll need to do a few extra steps.

First, click the design and Ungroup the layers.

Click the two bottom layers (the decorative gold pieces) and delete them.

Click “Shapes” and select a circle. Make it smaller to suit the size of the mistletoe you are making.

Click “Offset” and give the circle a border. Make it fairly thick so that the Cricut can cut the line easily.

Select both circles and press “Slice” to cut the small circle out of the big one.

Delete the inner circles so that you are left with a “ring” or doughnut shape.

Position the circle on top of the mistletoe so that it is slightly touching the green stems.

Hover your mouse over the circle. Press the Alt key (Windows computers) or Option key (Mac) and then click on the circle.

That will make a copy in the exact same place, so you will now have two circles, one on top of the other.

Select one of the circles and the very bottom green layer and click “Unite > Weld” to join them together.

Welding layers together moves the new layer to the top of the layers panel. Move it back to the bottom.

Then, select the second circle and the middle green leaf layer and Weld them together, then move the layer back into position.

Press “Select All” and Group the layers.

Duplicate the group to make a copy.

Click the copy and press “Flip > Horizontal” to make a mirror image.

This will allow you to stick the two mistletoe images back-to-back, so that it is decorated on both sides when it is hung up.

Step 3) Cut out all the layers

When you’re happy with how the project is looking in Design Space, click “Make” and follow the instructions on-screen to cut out all the pieces.

To change the paper size, go into the dropdowns over on the left side of the screen and choose the paper size that you want to use. You need to change it for every single colour.

To save space on your cardstock, you can move things around by clicking and dragging. Make sure when you’re moving things about that nothing overlaps because otherwise, it won’t cut out properly.

TIP: New to cutting cardstock with a Cricut? Check out this in-depth tutorial which goes through every step of the process, including tips for getting the best quality cuts from your Cricut.

Step 4) Stick the project together

Use 3D foam pads and glue to stick the layers together.

Use this guide to see the order to stick the layers together in.

A printable version of this assembly guide is included in the folder when you download the cut files.

My favourite glues to use on papercraft projects are Bearly Art Glue and Collall All Purpose Glue.

These are great because they don’t “warp” or bend the cardstock like some glues do. You can use as much of it as you want and the card stays perfect – and it dries perfectly clear too!

Bearly Art Glue comes with a tiny nozzle to make it easy to apply glue to small areas of card. The Collall glue doesn’t come with this, so it’s easiest to decant it into needle tip applicator bottles so that you have more control.

The foam pads that I use are from “Dot & Dab”, but any foam squares will work. If yours are big then you may need to cut them smaller with scissors to fit inside the edges of the layers.

When adding the foam pads to larger pieces of card, make sure you add some in the middles of the pieces of card so it gives stability to the middles.

If you don’t add any foam pads in the middles then it can “sag” under the weight of the other layers which doesn’t look as good.

Continue sticking the pieces together, following the assembly guide, until your papercraft is all finished.

If you are making the “hanging” version then glue the two copies back-to-back at the end and thread some ribbon through the hole.

Mistletoe layered papercraft design

After sticking all the pieces of card together, your Christmas mistletoe is all finished!

You could then mount it in a shadow box or glue it to the front of a greetings card.

If you’d rather not mount your project in a shadow box, check out these free easel stands for two alternative ways to display it.

Or, go for a more simplistic approach by making a triangle stand or nail hook.

The triangle stands are completely invisible from the front of the project, making it look like it’s standing up by magic! The hooks allow you to hang the design straight on the wall without a frame.

Happy crafting,
Sarah x